Here’s a guide on how to fold a pentagonal box.

The pentagon is considered a perfect shape, with its five vertices representing the five elements that form all things.
Incidentally, these five elements are fire, water, wood, metal, and earth.

The pentagon, which symbolizes “versatility” and “success,” is considered an auspicious shape.

Folding Instructions

You will need two 15-centimeter sheets of origami paper.

By the way, you’ll use two sheets for the main body and two sheets for the bottom flap.

The bottom flap should be 1 centimeter smaller, so use a 14-centimeter sheet of origami paper.

Let’s make a crease

First, fold it in half, then open it and fold both sides toward the center.

Next, fold both sides in half, but only fold them down to about the bottom quarter.

yurari

Since this is just a guide fold, you don’t need to crease the entire piece.

Next, fold the corner into a triangle.
Then, using this triangle as a guide, fold it upward.
Open the fold.

Fold the paper so that the fold you just made meets the fold created by dividing the paper into eight equal parts.

Next, fold the point where the crease you just made meets the fold that divides the paper into eight equal parts horizontally, then unfold it.

Draw a crease by connecting the point where the line divided into four equal parts intersects with the current fold, and the point where the line divided into eight equal parts intersects with the current fold.

After making four creases, flip it over.

Divide it into four equal parts and fold the bottom section.
Fold one more section as a bonus.

That’s it for the creases for now.

Crease the paper firmly so it will hold its shape when folded into a box

I’ve finished making the creases, but now I’ll adjust them so the box is easier to assemble.

First, make a valley fold along the section you rolled up.

Fold the top part into a mountain fold.

Next, turn it right side up and hold it.

Then, fold the triangular edge inward.

Next, fold along the dotted line and pull it toward you.

Repeat this step.

Finally, the shape will be almost a pentagon.

Prepare another piece with the same creases.

Assemble them into a box shape

Place two sheets of origami paper with creases so that they overlap at the center.

Then, fold the bottom crease in half twice.

Next, fold the triangular tip of the chopstick inward.
Since you’ve already made a crease, just follow it to fold the rest.
Make a valley fold and pull it toward you.

At the seam, fold the two pieces together into a valley fold and pull them together.

Now that you’ve come this far, you’re almost there.

Insert the final yellow section so that it fits inside.

Before that, insert the yellow piece into the gap between the overlapping green pieces.

At this point, slide the yellow piece from earlier into the gap.

Did it work out okay?

That’s it—you’re all set.

This is what the inside looks like.

It’s slightly loose, so hold it in place with your finger.

To make the bottom cover

To make the bottom flap, cut the fabric slightly smaller.
Make the width 1 centimeter shorter, then fold it in half just like the lid.

Watch a video tutorial on how to fold it

In Conclusion

There is a quiet joy in the sound of paper folding. Join me in this peaceful craft, where we transform a simple square into something extraordinary, one fold at a time.

投稿 Pentagonal Box —Perfect for Gifts or Small Items— は Japanese paper arts に最初に表示されました。

Here’s a guide to folding a traditional box.
This box has been made and passed down through the generations for centuries.
As you’d expect from something with such a long history, the folding technique is simple.
Not only is this box easy to make, but it also has many uses.

Folding Instructions

First, fold it into a square twice, then fold it into a triangle twice to create creases, and open it up.

Next, fold the corners toward the center, one by one.

Next, fold the top and bottom edges along the center line, then unfold them.

Once you open it, fold the left and right sides toward the center in the same way.

Now let’s open it.

Open only the top and bottom.

Leave the sides folded.

Now, fold the left and right sides along the creases so they meet at the center.

Next, fold along the dotted line, making a valley fold.

Then, fold the top part over so that it covers the bottom.
Since there’s already a crease, I think it will be easy to fold.

Now, let’s fold the other side in the same way.
And there you have it—the box is complete.

This is a view from above.
We’ve ended up with a sturdy box.

How to Fold the Lid

The box is finished.
Now you’ll probably want a lid, too.
You can make a lid by simply changing the size while using the same folding method.

There are two ways to make a lid.

After folding the four corners to meet at the center, leave a small gap instead of folding them exactly on the center line.

Leave a gap of about 5 or 6 millimeters.

If you continue folding in the same way, the piece will become slightly larger, allowing you to use it as a lid.

Second, cut the origami paper into slightly smaller pieces.

With this method, you can make several small boxes.

You can choose whichever method works best for you at the time.

When I made it using 15-centimeter origami paper, I ended up with a palm-sized box.

This is a box made by folding a 15-centimeter sheet of origami paper into quarters.
The folding technique itself is simple, but because it’s so small, it’s actually quite challenging.
But that’s what makes it so great.
I like folding small origami because it feels like I’m using both my fingers and my brain.

Watch a video tutorial on how to fold it

You can watch a video tutorial on Instagram.

You can view the instructions in a slideshow on Instagram.

Other simple boxes

This is a simple box made from a single sheet of origami paper.

折り方はこちら

A Simple Box That’s Easy to Make —Perfect for Small Gifts—

This is a box with pleats made using a ruler.

折り方はこちら

プリーツのたとう　－メッセージや招待状を入れて―

In Conclusion

There is a quiet joy in the sound of paper folding.
Join me in this peaceful craft, where we transform a simple square into something extraordinary, one fold at a time.

投稿 The Tradition Box ~A Simple Box with Many Uses~ は Japanese paper arts に最初に表示されました。

Here’s an easy way to fold a box with distinctive corners.
You can make it using just a single sheet of origami paper.
I especially like that you don’t need to measure the length to make this box.
Also, folding the corners back creates a sturdy box, and the contrasting color on the back adds a nice accent.

If you adjust the length slightly, you can make boxes of different heights.
They’re so easy to make and cute that I ended up folding a whole bunch of them.

In Conclusion

First, fold it into a triangle twice.

Fold the corner upward to create a crease that divides it in half.

yurari

If you fold this corner to less than half its length, the height of the box will change.
One of the things I like about this box is how easy it is to adjust its size.。

Fold both corners along the folded triangle.

Then, open it up to form a half-triangle.

Next, fold both corners along the creases.

After folding it, open it up and fold the corner without a crease in half to form a triangle.

Similarly, fold both ends and open them up.

Now it’s time to shape it into a box.
Using the creases at the corners as guides, pull the folds together from both sides.

かOnce you’ve pulled it taut, flatten it out instead of leaving it with sharp corners so it’s easier to fold.
That way, it’s easier to fold down the top triangle.

Once you’ve lowered the triangle, fold it along the edge to create a crease.
This will give you a sharp, defined corner.

Now, let’s fold the remaining corners in the same way.

Once you’ve folded all four corners, you’re done.

A box for making boxes of different sizes

When you fold it in quarters and then into a small triangle, the box gets taller and taller, and the opening gets narrower.
I tried folding it while gradually changing the size of the triangle.

Watch a video tutorial on how to fold it

Single-fold box

This is a simple box made from a single sheet of origami paper.

折り方はこちら

A Simple Box That’s Easy to Make —Perfect for Small Gifts—

折り方はこちら

プリーツのたとう　－メッセージや招待状を入れて―

It will have a lot of folds, but you’ll end up with a beautiful box.

折り方はこちら

How to Make a lattice-Patterned Box – Origami DIY –

In Conclusion

“I hope you enjoy the process of folding as much as the finished piece.
Don’t worry if it’s not perfect at first—every fold is a step toward your own unique creation.
Happy folding!

投稿 A stylish box with corner accents —easy to make with origami— は Japanese paper arts に最初に表示されました。

Here’s a guide to making a box lid by assembling pieces.

You can make a box simply by combining four pieces folded in the same way.

You’ll want to make lots of these tiny boxes that fit right in the palm of your hand.

Since the lid is shaped like a flower, you can give it as a gift just as it is—no ribbon needed.

Why not give it a try and make one?

Folding Instructions

Here, we are using four 7.5 cm × 7.5 cm sheets of origami paper.

First, make the box lid, and then make the box bottom.

Make the box lid parts

　

First, fold it in half and mark the center.

Then, fold the left and top corners toward the center.
Fold the top corner back.

Fold it in half.

Fold it again along the crease.

Unfold the crease.

Align the corners marked with red circles and fold.

Turn it over.

Then fold it so that the corners marked with red circles meet.

Next, flip it over again and form the corners as you open it up.

Now the piece is ready.

Shape it like this.

Choose your favorite color, then fold it three more times.

Assemble the box lid components

Now that you’ve folded it into quarters, let’s connect the pieces.

Here, look at the corner indicated by the white arrow.

Insert the flat side indicated by the red arrow into this corner.

First, insert the light blue flat piece into the pink corner.

Make sure it goes all the way in.

This is the third piece.

Place the flat pink piece into the light blue corner.

Next, here’s the fourth piece.

Insert the light blue flat piece into the pink corner.

Finally, connect the first and fourth parts.

Be careful not to knock them over as you connect them.。

All that’s left is to shape it, and it’s done.

Watch a video tutorial on how to fold it

Make the bottom of the box

You can easily make this using the folding method for this adjustable-size box.

あわせて読みたい

A box whose size can be freely adjusted

Well, here is a box pig I made by combining all four parts.

I got so carried away having fun that I ended up making a whole bunch of them.

あわせて読みたい

A box whose size can be freely adjusted

あわせて読みたい

How to Make a Box by Combining Four Pieces

In Conclusion

Simple, elegant, and made with love. Until next time, happy crafting!

投稿 A Flower Box Made from 4 Parts — A Simple Box with a Beautiful Finish — は Japanese paper arts に最初に表示されました。

Here’s a guide to making a box out of four origami pieces.

The great thing about this box is that you can adjust its size however you like.

Making the pieces is easy, but I used to struggle with putting them together.

Once I figured it out, though, I was able to do it without any trouble.

So, I hope this assembly guide helps you get the hang of it.

What do you think?

Folding Instructions

Here, we are using four 7.5 cm × 7.5 cm sheets of origami paper.

First, make the box, and then make the lid using the same method.

Make parts

Let’s get started.

Fold the origami paper in half,

but don’t actually fold it—just mark the fold line.

Next, use that mark as a guide to fold the paper.

Fold the left corner down sharply.

Fold the long rectangle on the right so that it lies against the triangle.

Fold the triangle back once, then tuck it into the crease on the right.

Fold along the dotted line.

The part is complete.

Make four of these parts.

Assemble the parts

Next, I’ll start assembling it, so I’ve laid out the four pieces.

They look just like four fish.

So I decided to add some eyes.

Like this, I’ll assemble them so it looks as if the fish are eating each other’s tails one after another.

In practice, you combine these four parts like this.

Next, lower the triangle counterclockwise.

Finally, slide it into the gap.

And that’s it!

And the fish all came together in harmony.

Watch a video tutorial on how to fold it

Make the lid for the box

Next, let’s make the lid.

Earlier, we folded the paper so that the edges met in the middle,

but this time, we’ll fold it about 2–3 millimeters short of the center to create the piece.

This will result in a slightly larger lid.

Then, make four of these and assemble them.

Change the box size

As you can see, by changing the initial width, you can freely adjust the height.

This is all it takes to easily change the size.

In Conclusion

Take your time, breathe, and enjoy the quiet magic of paper.
I would love to hear how your creation turned out.

投稿 A box whose size can be freely adjusted は Japanese paper arts に最初に表示されました。

Here’s a guide on how to fold a cross-shaped box.
I discovered that there’s a box that matches the cross-shaped envelope, and I wanted to make one, so I searched high and low.
But I couldn’t find any instructions on how to fold it.

I gave up, thinking there was no other way, but after a while, I started worrying that I really wanted to try folding it after all.
So, I decided to try folding it myself.
After all, this box actually exists.

I figured if I tried hard enough, I could probably fold it.
It wasn’t easy, though.
I managed to pull it off, but I wonder if there isn’t a slightly simpler way to fold it.

There are a lot of folds, so it might be a little confusing.
Still, I’d be happy if you enjoy this origami project.

The box on top has a cross on it,
and the white one below is an envelope with a cross on it.

Folding Instructions

Make a crease

First, fold it into a square.

Next, connect the corner to the center mark to create a crease.

Make a crease from the top right as well.

Turn it over and fold the top triangle toward the back.

Then, fold along the dotted line.

Do not fold the triangle you just made.

Open this triangle downward.

Next, fold the bottom corner along the edge.

Flip it over and fold the other side in the sOnce you’ve folded both sides, fold the edges toward the center.

Again, do not crease the paper into a triangle at this stage.

Once you’ve folded both sides, fold the edges toward the center.

Again, do not crease the paper into a triangle at this stage.

Make the same fold vertically as well.

The dotted square represents the bottom of the box.
The white lines represent the corners of the box.

Make a cross-shaped fold

Turn it over, then fold the triangle along the bottom line.

Fold along the line connecting the corner of the origami paper to the corner of the box.
Fold it so that it aligns with the base of the triangle.

Then, fold along the line at the bottom of the box, making sure the triangle doesn’t extend beyond the edge.

Make this fold on the remaining corners as well.

Fold the line that forms the corner of the box upward.

Let’s shape it into a box

First, fold the base box.

Fold the corners of the box you just folded.

I’ve just folded the corners of the box.

Here is a side view.
Fold the pointed corners along the creases.
Then, align the next small corner so that it overlaps the previous one.

Then fold the next pointed corner, followed by the small corner, and repeat this process.

I’ve just folded the third corner.
Fold the fourth corner in the same way, but attach it to the first corner.

Here is the finished cross-shaped box.

Test fold

The box on the left was folded using the method I described.
The box on the right was made before I learned that folding technique.
There’s a hole in the center, so you can see inside.
I thought it might be okay as is, but I decided to put in a little more effort.

Cross-shaped envelope

十字のたとうの折り方はこちら

折り紙で　十字のたとう

Watch a video tutorial on how to fold it

In Conclusion

I hope I can find a way to reduce the number of creases.

For now, I’ll leave it at that for this trial run.

Wishing you a mindful and creative day through the art of origami.

投稿 Box with a cross to close it　 は Japanese paper arts に最初に表示されました。

This is one of my recent favorites—a beautiful box adorned with two small cranes on either side.
I love how versatile this design is; depending on where you make the small cuts, you can create countless variations.
It’s a wonderful way to express your own creativity!

What You’ll Need

First, you’ll need origami paper, scissors, and glue.

You don’t need anything special.

Folding Instructions

First, make some folds.

Fold it into a square twice, then fold it into a triangle twice.

Unfold it, then fold the top and bottom corners toward the center.

Unfold it again.

　　

Next, fold the top and bottom corners along the creases you just made.

From here on, it’s like rolling it up.

Fold the small triangle that appears along the crease.

Next, align it with the center line and fold it.

Next, fold along the dotted line, passing through the center point.

Be sure to keep the right angle in mind at all times.

Do the same on the other side.

Pull the part marked with a circle toward you to open it.

　　

Surprisingly, a pentagon appears.

Next, fold this pentagon along the dotted lines.

Now a triangle appears.

Fold the other side in the same way.

　　

Once you’re done with the other side, it will look like a pentagon.

Next, fold the triangles on both sides.

　　

Fold two cranes

I’ve laid the pentagon on its side.

Fold the top and bottom triangles inward.

Then, fold along the blue dotted line toward the opposite side.

Next, make two creases.

Fold each one like this.

If you fold along the dotted line, you’ll get a small triangle.

Then, open it out to the left and right and fold it.

A small square will appear.

Use this square to make a crane.

Fold the large triangle on the left over it to form a pentagon.

Fold the other side in the same way.

Let’s turn this small square into a crane.

First, make a crease and open it up.

Fold it over and make a cut.

This cut will determine the direction the crane faces.

You can make the cut on the right side if you prefer, or on both sides.

If you make cuts on both sides, you’ll also get a tail.

Make the neck, and it’s done.

Open up the marked area and apply glue.

And that’s it—it’s finally finished.

As you can see, square boxes are cute too.

Plus, you can always turn them into cranes.

Watch a video tutorial on how to fold it

In Conclusion

Simple, elegant, and made with love. Until next time, happy crafting!

投稿 Twin Crane Box: A Versatile and Elegant Handcrafted Treasure は Japanese paper arts に最初に表示されました。

Folding this box offers a different kind of satisfaction compared to the usual sense of achievement you get from a standard crane.
It’s a perfect blend of utility and beauty.
Why not give it a try and see for yourself?

What You’ll Need

First, you’ll need origami paper, scissors, and glue.

You don’t need anything special.

Folding Instructions

First, make some folds.

Fold it into a square twice, then fold it into a triangle twice.

Unfold it, then fold the top and bottom corners toward the center.

Unfold it again.

　　

Next, fold the top and bottom corners along the creases you just made.

From here on, it’s like rolling it up.

Fold the small triangle that appears along the crease.

Next, align it with the center line and fold it.

Next, fold along the dotted line, passing through the center point.

Be sure to keep the right angle in mind at all times.

Do the same on the other side.

Pull the part marked with a circle toward you to open it.

　　

Surprisingly, a pentagon appears.

Next, fold this pentagon along the dotted lines.

Now a triangle appears.

Fold the other side in the same way.

　　

Once you’re done with the other side, it will look like a pentagon.

Next, fold the triangles on both sides.

　　

Folding a crane

Fold along the dotted lines to form a long white rectangle.

Then place a large triangle on top of it.

　　

Cut up to the center on the top and just short of the center on the bottom.

Glue the outer triangles to the inside.

　　

First, align the top corner with the center corner.

Then, align the center corner with the bottom corner.

　　

Then, a white square appeared.

We’ll use this square to make a crane.

　　

Fold up the neck and tail, and you’re done!。

　　

Here’s the box just after opening it.

　　

There are also boxes with two cranes, one on each side.

Watch a video tutorial on how to fold it

You can watch a video tutorial on how to make it on Instagram.

In Conclusion

May this lucky crane bring a touch of Japanese tradition and much happiness to your home.
Thank you for joining me in this peaceful craft today.

投稿 Origami Box with a Crane Accent: A Touch of Elegance は Japanese paper arts に最初に表示されました。

I’m excited to show you how to fold a two-tone crane using just one sheet of paper.
With only a tiny bit of extra effort, you can create a striking bi-color effect.

There are three simple variations you can try. When I first discovered this technique, I was amazed that such a simple method could create such a dramatic look.
This is exactly why origami is so endlessly fascinating!

Folding Instructions

Pattern 1

The first one is this crane, with different colors on the left and right sides.

First, fold the top corner down.

Next, fold the bottom corner toward the back.

Fold the left triangle to the right.

Then, fold the top triangle down.

Next, unfold it into a square.

This is what it looks like from below after unfolding.

Make a crease and open it up.

You’ll see that it’s divided into two equal halves.

Finally, fold it into a basic paper crane, and you’re done.

Pattern 2

The second one is a method for folding a crane with different colors on the front and back.

First, fold the top corner down.

Next, fold the bottom corner toward the back.

We’ll fold this smaller square into a crane.

Fold it upward, then bring the left triangle over to the right.

Then unfold it into a square.

This is what it looks like from below after unfolding.

Make a crease and open it up.

You’ll see that it’s divided into two halves, top and bottom.

Finally, fold it into a basic paper crane, and you’re done.

Pattern 3

Finally, here’s how to fold a two-color crane using the opposite corner.

First, fold the top and bottom corners toward the center.

Next, fold the left and right corners toward the back.

Unlike previous folding methods,

you can fold this one without worrying about the orientation.

From here on, just fold it the same way as a basic origami crane.

The color scheme will look like this along the way.

That extra step for a polished finish

If you secure it with double-sided tape, it will fold neatly.

Both sides are covered.

Displaying a two-colored crane

Watch a video tutorial on how to fold it

In Conclusion

I hope you enjoy the process of folding as much as the finished piece.
Don’t worry if it’s not perfect at first—every fold is a step toward your own unique creation.
Happy folding!

投稿 Two-Tone Origami Crane: Creating Magic with a Single Sheet は Japanese paper arts に最初に表示されました。

This is a simple rectangular box you can make whenever the mood strikes.
It’s perfect for holding small gifts.
I think it’s just right for Valentine’s Day chocolates for friends.
I folded it while thinking, “I wish I could have had that kind of youthful experience.”

Folding Instructions

First, fold it in half twice, then open it up.

Next, fold both corners along the creases.

Now let’s fold it in half.

Next, fold both corners.

Next, fold along the line of the lower triangle, then open it up.

Then, fold it down and bring it back up.

Next, bring the two corners together as if pinching them.

Fold the corner inward.

Next, pull the dotted fold toward you.

Fold the remaining top section inward.

This part is a little tricky. But this is the only difficult part.

Once you’ve put it all together, you’ve got a simple rectangular box!

Box size

If you use a 15-cm sheet of origami paper, the resulting square will be approximately 4 cm on each side and 7.5 cm long.

How to Make a Bottom Lid

I trimmed about 3 mm off the top and bottom edges of the bottom flap, then folded it using the same method.

I think this method is easier for folding the bottom flap.

あわせて読みたい

A Simple Rectangular Box 　— A Two-Tone Box —

Watch a video tutorial on how to fold it

You can view the instructions in a slideshow on Instagram.

You can watch a video tutorial on Instagram.

You can view the instructions in a slideshow on Instagram.

Types of rectangular boxes

This rectangular box is flatter.
The folding instructions are a bit more complicated, and the top and bottom sections are folded differently.
This is so that the box looks neat even when using origami paper with different colors on each side.

あわせて読みたい

Let’s make a rectangular box and a lid

This is another very user-friendly box.

あわせて読みたい

便利なロングボックス　―整理整頓に役立つ細長い箱―

In Conclusion

I hope you enjoy the process of folding as much as the finished piece.
Don’t worry if it’s not perfect at first—every fold is a step toward your own unique creation.
Happy folding!

投稿 Easy-to-Make Rectangular Box　～Perfect for Valentine’s Day, Too は Japanese paper arts に最初に表示されました。